Start selling package of small 6 axis motion sensor + data logger with up to 400 G acceleration sensor

Small 6-axis motion sensor with up to 400 G acceleration sensor

+ Start selling package of data logger

- In-vehicle network CAN connection - Measurement of vibration and posture of the mechanical section of the vehicle -


IMU-Z Cube Data Logger Package

This time, ZMP Corporation (Bunkyo-ku, Tokyo, President and Representative Director: Hitoshi Taniguchi, hereinafter referred to as ZMP) is the "IMU-Z Cube Data Logger Package" with a small 6-axis motion sensor with a maximum 400 G acceleration sensor and a data logger set We began selling.

The IMU - Z Cube is a compact sensor module of about 2 cm square that supports an in - vehicle network CAN (Controller Area Network) with an acceleration sensor capable of 3 - axis acceleration measurement up to 400 G and a 3 - axis gyro sensor. It is used for measuring the vibration and posture of the mechanical department at the automobile / parts maker. By combining with the compact data logger GL1000 of abundant achievement as an in-vehicle data logger, it becomes possible to measure without using a PC, measuring while moving outdoors, a vehicle that is difficult to mount a PC, a mobile robot It is expected that measurements will be easier with, etc., and the freedom of research and development will be enhanced. Additionally, it is possible to respond to changes such as changing the data logger to GL 1010 which supports the IP65 (dustproof / waterproof), to 9 axis motion sensor IMU - Z2 equipped with geomagnetic sensor in addition to acceleration · gyroscope.

The price of the IMU - Z Cube data logger package is 420,000 yen (tax not included) and will be on sale from today.


Product introduction IMU - Z Cube
http://www.zmp.co.jp/products/imu-z-cube
    

GL 1010 (IP65 compatible type) IMU - Z 2


【IMU - Z Cube Features】

Acceleration sensor capable of acceleration measurement up to 400G and 3 axis gyro sensor
Compact size (21 × 21 × 22 [mm], about 5 [g])
CAN connection
Communication protocol release
Application attachment (simple viewer, setting tool)

 【Price】
IMU - Z Cube Data Logger Package 420,000 yen (excluding tax)
(6 axis motion sensor IMU - Z Cube + data logger)

· IMU-Z Cube basic set × 1
· Data logger GL 1000 × 1
· Connection cable × 1
※ IP65 (dustproof / waterproof) compatible We propose to change to GL1010. Please inquire details.

IMU-Z2 Data Logger Package 518,000 yen / Academic 418,000 yen (tax not included)
(9 axis motion sensor 3 axis acceleration + 3 axis gyro + 3 axis geomagnetic sensor + data logger)

・IMU-Z2&SDK ×1
· Data logger GL 1000 × 1
· Dedicated cable × 1

IMU-Z Cube Specifications

Acceleration Resolution 16 (2 to 16 G), 12 (100 to 400 G) [bit], 3 axis, ± 2/4/8/16/100/200/400 [g]
Angular velocity (gyro 3 axis, ± 250/500/1000/2000 [deg / sec] (switchable), resolution 16 [bit]
Communication interface CAN
Sampling Acceleration: 1 ms (1000 Hz) to 10000 ms (0.1 Hz)
Gyro: 1 ms (1000 Hz) to 10000 ms (0.1 Hz)
(Switchable in 1 ms increments)
Size 21 x 21 x 22 [mm]
Weight About 5 [g]
Power supply

3.3 to 15 [V] (rated 5 [V])


GL1000 / GL1010 (IP65 compatible type) Main specifications

Corresponding bus system CAN, LIN
Channel CAN channel × 2, LIN channel × 2
memory SD memory card (maximum 2 GB), SDHC memory card (maximum 32 GB)
data transfer USB
Sleep / Wake up
Start-up time 150 ms (in case of enclosed SD card)
Output Digital input / output × 2 (0 to 36 V), analog input × 4 (0 to 16 V)
Keypad / Display ×
Supply voltage 5.8 to 30 V
Temperature range GL 1000: -40 to + 85 ° C (according to SD memory card)
GL 1010: -20 to + 80 ° C (according to SD memory card)
Dimensions (W x H x D)

GL 1000: about 107 × 85 × 35 mm, GL 1010: about 130 × 85 × 35 mm


Press Release Articles

『ラクロシェアリングサービス』始まる!無料申し込み受付中!

Robotown

こちらではZMPのサービス・製品をご紹介します!

無人サービスロボ
Life Robot Brothers
低速自動運転ロボを活用した事業開発やサービス提供
RoboCar
イノベーション
自動運転用車両や研究・開発向けセンサー&ツール販売
CarriRo
クリエーション
無人フォークや台車ロボを活用し物流無人化を実現
IZAC
レボリューション
ZMPが開発する自動運転ソフトであらゆる機械の自動化を実現

ZMPが描く自動運転で実現する未来 ~ZMP Vision~

自動運転で実現する未来

ZMPで一緒に働きませんか?

To TOP