Products & Services

Simple vehicle data acquisition system ZMP Position & Motion Vehicle CAN measurement package

Position & Motion Vehicle CAN measurement package PC set
Position & Motion Vehicle CAN measurement package without PC

Simple vehicle data acquisition system ZMP Position & Motion Vehicle CAN measurement package overview / feature

Vehicle CAN information, acceleration and position can be measured with existing PC.
This product is a basic set of GPS / atmospheric pressure sensor "ZMP Position-Z2", 9 axis wireless motion sensor "ZMP IMU - Z2", CANUSB interface "CANUSB - Z", measuring PC. Users can immediately acquire vehicle attitude and position information in CAN format in addition to vehicle information such as vehicle speed from various sensors connected to the PC with dedicated software installed via the USB interface. In addition, as long as the PC meets the specifications, it can be measured even on a PC owned by the user, and it can be introduced cheaply and easily. It also possesses versatility that it is also possible to install a dedicated CAN logger instead of a PC.
Characteristics
Simultaneous measurement with GPS, acceleration (3 axis), gyroscope (3 axis), geomagnetism (3 axis), barometric pressure up to 10 [msec]
The sensor section consists of a position sensor module (42 × 52.5 × 20.5 [mm]) and a motion sensor module (36 × 52 × 11 [mm]) and can be installed in any place
Connectable to PC with wired (CAN)
CAN protocol release. Setting · Viewer application included
OBD II compatible connector included for vehicle behavior measurement

Introduction of data measurement service
Everyone who is considering a logger package
Do you have any troubles with data measurement?

Through ZMP's automatic operation development and customization services,
We also offer data measurement service using real cars.

Measurement of data using a ZMP logger
We can provide necessary services according to customers' requirements and requirements.

For details, please check the following.

Real vehicle data measurement service RoboTest (Robotest)
http://www.zmp.co.jp/products/robotest

Simple vehicle data acquisition system ZMP Position & Motion Vehicle CAN measurement package specification

Position sensor module ZMPR POSITION-Z2
GPS

Location accuracy: 3 m CEP (50%), channel: 99 channels, geodetic data: WGS 84, GPS sensitivity: -165 dBm (tracking), -148 dBm (acquisition)

Pressure sensor Measurement range: 260 ~ 1260 bPa, resolution: 0, 01 hPa (about 10 cm), accuracy ± 0, 1 hPa (about 1 m, @ 800 to 1100 hPa, 25 ° C), reference sensor temperature: 0 to 65 ° C
Communication interface CAN (500k / 1 MbPs, standard format) * Combination with ZMPR IMU-Z2, Carto RUP PRO also enables Bluetooth communication
Sample rate

GPS: Maximum pressure: Maximum 10 Hz

Operating environment Operating temperature: 30 to 85 ℃, operation guarantee temperature: 0 ℃ to 60 ℃ ※ No condensation
Power supply 3.3 V (input voltage range: 3.3 to 1.5 V)
Size / Weight 40 [mm] x 55 [mm] x 20 [mm], about 32 [g]
Motion sensor module ZMPR IMU - Z2
Sensor Three-axis acceleration sensor (± 2/4/8/16 [G] (switchable), 12 [bit] *)
Three axis gyro sensor (± 250/500/2000 [deg / s] (switchable), 16 [bit] *)
3-axis geomagnetic sensor (± 0.88 to 8.1 [gauss] (switchable), 12 [bit] *) (depending on sampling rate)
CPU ARM Coretex-M3 processor
Communication interface Bluetooth Ver 2.0 + EDR Class 1, CAN
Sample rate Acceleration sensor: Maximum 1 [msec] / Gyro sensor: Maximum 3 [msec] / Geomagnetic sensor: Maximum 6 [msec]
Power supply 3.3 to 15 [V]
Size / Weight 36 × 52 × 11 [mm], 20 [g] (batteries not included)

Simple vehicle data acquisition system ZMP Position & Motion Vehicle CAN measurement package price

ZMP Position & Motion Vehicle CAN measurement package PC set 436,000 yen (tax not included)
ZMP Position & Motion Vehicle CAN measurement package (without PC) 286,000 yen (excluding tax)

Simple vehicle data acquisition system ZMP Position & Motion Vehicle CAN measurement package usage image

Connection example

For product inquiries here

To TOP

Send with this content. Is it OK?