Support for long time measurement Stereo camera RoboVision 2 SSD package launched

Measurement continuously for 4 hours at -1280 x 960 pixels · 30 fps. Easy to operate portable SSD set -

<Stereo camera RoboVision 2s>

<System configuration (When two RoboVision 2 s are connected>

ZMP Corporation (ZMP, Tokyo, Bunkyo-ku, CEO: Hisashi Taniguchi, hereinafter ZMP) began selling "RoboVision 2 SSD package", a stereo camera capable of measuring stereo images for 4 hours at 1280 x 960 pixels · 30 fps today did.

ADAS · In the development of autonomous driving technology and the development of robot technology, the importance of environment recognition with cameras is increasing more and more, especially the use of stereo cameras that can calculate the distances with only cameras is drawing attention. We sell RoboVision 2, a stereo camera equipped with Sony's ultra-sensitive CMOS sensor, from 2015, and we are using it in automobile / parts manufacturers, construction machinery, research institutions, etc. We have started selling packages with the latest version of RoboVision 2s, the latest SSD, and the latest version of software development environment supporting long time high resolution image storage.

In the new software development environment, image measurement can be performed by specifying the size and frame rate of the image to be measured with the stereo camera, and continuous measurement of 4 hours is possible by using the large capacity SSD as the storage destination. In addition, it is possible to measure for a longer time by using multiple SSDs. Stereo camera RoboVision 2s supports up to two simultaneous measurements. We also offer a conversion tool for measurement images, we provide an environment that can be easily used for image recognition and image processing by converting to PGM format. In addition to standard measurement images, you can also measure WDR (wide dynamic range) images, measure quad-VGA, VGA and image size. In the attached sample program, you can easily set the image measurement by entering commands from the command line. Because it uses a high capacity portable SSD with USB connection as the storage medium, it is possible to operate such as exchanging the SSD for each experiment scenario while keeping the setting of the PC / camera, for example. By using the object detection option, processing such as obstacle detection can be performed on the image data acquired with this package as input.

RoboVision 2 SSD package is 1.4 million yen (tax not included) and will be on sale from today.

【Product website】 Stereo camera RoboVision2s

【Main specifications】 Stereo camera RoboVision 2s

The camera module Image sensor Sony 1/3 type effective 127 thousand pixels
CMOS image sensor IMX 224 × 2
Resolution 1280 × 960 pixels (30 fps), 640 × 480 pixels (120 fps)
Horizontal view angle 45°


USB 3.0
Baseline length 210 mm
Function Synchronization, distortion correction, stereo collimation, wide dynamic range, etc.

Software development environment (SDK)

Library Camera I / F, parallax image generation, logging (*)


RAW output, distortion correction result output, parallax image output *
Operating environment Linux / Windows 8.1

※ Product images and specifications are under development and subject to change without notice. The resolution and frame rate depend on the specifications of the PC.

* Software development environment logging function overview
Resolution / Frame rate: Quad-VGA (1280 x 960) / 1, 2, 3, 5, 6, 10, 15, 30 (fps), VGA (640 x 480) / 1, 2, 3, 5, 6, 10, 15, 30, 60, 120 (fps)
WDR (Wide Dynamic Range) measurement: Quad-VGA only
Multiple camera measurement: Up to 2 units

RoboVision 2 SSD package 1.4 million yen (excluding tax)
· Stereo camera RoboVision 2s, measurement PC, portable SSD (2 TB), set package of software development environment

RoboVision 2s Object detection option 500,000 yen (excluding tax)

Software capable of outputting the size and position of an arbitrary object

【Press Release Articles】
You can check press release PDF here.


Send with this content. Is it OK?