Unmanned forklift CarriRo® Fork starts accepting orders for new walky type models

-Compact and reasonable, flat pallets can be loaded and unloaded. Shipment will start in November 2021-

CarriRo Fork Walky type new model
(The image on the right shows the maximum lift of 2.9 meters)

ZMP Inc. (Bunkyo-ku, Tokyo, CEO: Taniguchi Hisashi, hereinafter ZMP) has started accepting orders for a new walky type model of the unmanned forklift CarriRo Fork.

The reach type to be sold from 2020 has a maximum payload of 1.4 tons and a maximum lift of about 6 meters, and its introduction is expanding because it can be used in the same way as the reach forklift normally used in warehouses. .. On the other hand, although the payload and lift are not required to that extent, there are also voices that want to introduce it reasonably, so we have developed a new walky type model and will start selling it this time.

Compared to the conventional walky type, the payload is reduced from 1.4t to 650kg, eliminating the need for a reach leg to support the vehicle body at the bottom, and it can also be used for loading and unloading general plastic pallets when placed flat.

In the case of existing factories and warehouses, it may be difficult to introduce unmanned forklifts due to environmental restrictions such as low ceilings and low floor loads. In that respect, this walky type can be used even in such an environment because the body weight is less than 1.8t and the height is 2.2m.

Furthermore, since the price is set at a reasonable price compared to the reach type, in the case of labor saving of hand lift work, the introduction cost can be reduced even in the part where it was difficult to obtain the cost effectiveness by introducing the unmanned forklift. There is more room for labor saving.


Features of the new walk type model
① Flat pallets up to 650 kg can be loaded and unloaded.
(2) Since the car body is compact, it can be used even in an environment with a low ceiling and a low floor load.
③ Because the price is reasonable, it can also be used to save labor in hand lift work.

This product will be demonstrated on-board at ZMP World 2021 Demo Week, which will be held at the CarriRo Innovation Center from July 27th to 29th, 2021.

[ZMP World 2021 Demo Week]
Date and time: July 27th (Tuesday) -29th (Thursday), 2021 10: 00-18: 00
Venue: CarriRo Innovation Center (3-11-10 Edagawa, Koto-ku, Tokyo, STS Tsukishima Warehouse 4F)
Participation fee: Free
Event Page:​ ​https://www.zmp.co.jp/event/zmpworld2021/demoweek
Reservation page:https://forms.gle/eUBfacpzrtTiNw5f8


[Main product specifications]
CarriRo Fork Walkie type

Body dimensions
Overall length 2540 x overall width 1050 x overall height 2165 (mm)

Forklift type

Walkie (walking type)
Payload
~ 650kg
Maximum speed
4.2km / h when unloaded, 3.6km / h when loaded

Stop accuracy

± 20mm
Vehicle weight
1762kg
Safety function
Laser sensor, bumper sensor, emergency stop button


[CarriRo Fork Price]
CarriRo Fork (Walky type): 5-year lease Monthly fee 226,000 yen (excluding tax) / 1 unit


[Carri Ro Fork product page]

https://www.zmp.co.jp/carriro/carriro-fork


[About the unmanned forklift CarriRo® Fork]
The unmanned forklift CarriRo Fork is a product developed by utilizing Autonomous Driving technology that ZMP has cultivated in Autonomous Driving The base vehicle for the forklift truck is made by Linde Material Handling. A Autonomous Driving fork operation, achieving an operating accuracy of ± 10 to 20 mm. This makes it possible to automate and save labor in pallet transportation for transportation work in distribution warehouses and factories. The feature is that it can be realized in a few days from the pre-mapping of the work area to the start of operation with a simple setup, which reduces the labor shortage, which is an urgent issue, and contributes to solving social issues.


[Press Release Article]
Click here for Press release PDF


[High quality image]
CarriRo Fork Walkie Type New Model 01
CarriRo Fork Walkie Type New Model 02

ラクロに乗って姫路観光しよう!絶賛予約受付中!

Please see ZMP services and products below

Unmanned service robot
Life Robot Brothers
Business development and service provision utilizing low-speed Autonomous Driving robots
RoboCar
Innovation
Sales of sensors and tools for Autonomous Driving vehicles and R & D
CarriRo
Creation
Realization of unmanned logistics using unmanned forks and bogie robots
IZAC®
Revolution
Autonomous Driving software developed by ZMP realizes automation of all machines

~ ZMP Vision ~​ ​

The future realized by Autonomous Driving

Let's work together at ZMP

To TOP